Page 10 - EF Power of Direct Mail

QUICK

REFERENCE

SUPERSEAL CARDS
• Magnet must be 1/2” from all edges.
• If magnet is 3“ x 5” or larger, 1“ from all edges is required.
• If magnet is .030 mil”, 1“ from all edges is required and the minimum card size
should be 6” x 9“ (SS05).

STICK-UP CARDS

• Magnet must be 1/2” from the edge.
• If mailing, the USPS recommends that the magnet is on the leading edge.

ROMANCE CARDS

• Magnet must be 1/4” from all edges.
• These cards mail at non-auto/non-machinable rates. Do not use the rates above.

BI-FOLD CARDS
• Magnet must be 1/4” from all edges and folds.
• These cards require 2 tabs at the top if the fold is at the bottom OR 2 tabs on the
trailing edge if the fold is on the leading edge.

ADDITIONAL INFORMATION

• Magnets cannot exceed 26 sq. in. to qualify for letter rate postage.
• Allow a 4” L x 1.5” H area for the address block.
• Address proofs will be sent for approval of the layout. This is so the customer can verify
that all of the information required is printing in the address block before we process
the mail.

ef Design Group, Inc www.efdg.net 773-285-0044